FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS

Contact Now

Full complement cylindrical roller bearings are located here in the vessel crane. A rope sheave, is a pulley with a grooved wheel that holds a rope. Spinning inside the frame of the sheave, the grooved wheel allows the rope to move freely minimizing wear and abrasion.

 

Full complement cylindrical roller bearings are designed for heavier loads than same dimensioned counterparts using a cage. This added load carrying capacity is because of the increased number of rollers and is a trade- off for the lower speed rating. These ISO metric dimensioned bearings are supplied with C3 Internal Radial Clearance unless specified. They are industry interchangeable with like size numbered bearings and are used in such applications as accumulator sheaves, gearboxes and walking beam furnace eccentrics.

 

160 mm x 200 mm x 40 mm NSK RSF-4832E4 FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS

214 7.3800 in
Medium Duty 052002

300 mm x 460 mm x 218 mm NSK RS-5060 FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS

4.3750 in Lubrication Fitting
UCFCF200 Set Screw

560 mm x 820 mm x 195 mm NSK NCF30/560V FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS

19 mm Without Snap Ring
45 mm C3

160 mm x 240 mm x 60 mm NSK NCF3032V FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS

3.9375 in Split Pillow Block
Cast Iron 125000 lb

420 mm x 560 mm x 140 mm NSK RSF-4984E4 FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS

180 mm 087796220331
300 mm Brass Cage

400 mm x 540 mm x 82 mm NSK NCF2980V FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS

Not for Ball Screws 115 mm
46.5 kN ABEC 9/7 (

380 mm x 480 mm x 100 mm NSK RSF-4876E4 FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS

C3 1
Two Flanges on Outer 170 mm

560 mm x 680 mm x 56 mm NSK NCF18/560V FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS

105 mm M125x2 mm
AH(X)23 98 mm

180 mm x 250 mm x 69 mm NSK RS-4936E4 FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS

Click here 8.0000 in
2.8124 in 0053893048178

150 mm x 210 mm x 60 mm NSK RSF-4930E4 FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS

2.0000 in Contact Seal
3.7500 in Non-Expansion Bearin
1/9