GGB BEARING CO., LTD.
- AddressPlot No. 187, Sector99, HSIIDC Growth Centre, Bawal Distt. Rewari, Haryana87651, India
- Phone(Working Time)212-522-67-78-90
- Phone(Nonworking Time)212-522-67-78-90
ROLLING BEARINGS FOR STEEL MILLS
Contact NowRolling Bearing For Steel Mills works operate under a variety of harsh conditions, including high temperatures, high speed or super low speed operation, as well as environments contaminated with water and debris.Our products support the stable operation of equipment under the toughest conditions.
Proper lubrication of rolling element bearings and gears is critical to long and profitable performance. The basics for successful lubrication of these machine elements are discussed. Procedures for correct selection of oil and grease lubricants are defined. Alternate systems for delivering proper lubrication are presented. Preventive and predictive methods for maintaining lubrication systems at their peak are suggested.
Bearing Number | Bore Dia | Outer DIa | Width | Size |
---|---|---|---|---|
NSK 380KV895 ROLLING BEARINGS FOR STEEL MILLS | FA209- | -20 °C | 200 °C | 53 mm |
NSK 190KV2651 ROLLING BEARINGS FOR STEEL MILLS | 19.5 kN | 48.3 mm | M6x1 | 12 mm |
NSK 152KV2251 ROLLING BEARINGS FOR STEEL MILLS | 35.1 kN | YAR 210-115-2RF/VE49 | 57.6 mm | 2200 r/min |
NSK 558KV7351 ROLLING BEARINGS FOR STEEL MILLS | 137 mm | M6x1 | 24.6 mm | 38.1 mm |
NSK 609KV7851A ROLLING BEARINGS FOR STEEL MILLS | 0.4 Hz | 2.5 mm | 7.8 Hz | SNR |
NSK LM767749DW-710-710D ROLLING BEARINGS FOR STEEL MILLS | 1,600 rpm | SNR | 2.32 | 128 mm |
NSK 480KV80 ROLLING BEARINGS FOR STEEL MILLS | 0.71 kg | 130 mm | 7.5 mm | 39 mm |
NSK 710KV9001 ROLLING BEARINGS FOR STEEL MILLS | PA212N- | M6x1 | 32.8 kN | 16.8 Nm |
NSK 304KV4955 ROLLING BEARINGS FOR STEEL MILLS | 4152 | 1 | 8500 | NJ307ET |
NSK 180KV3001 ROLLING BEARINGS FOR STEEL MILLS | 5.37 | 8000 | 1 | 7919CDF |
NSK 140KV81 ROLLING BEARINGS FOR STEEL MILLS | 19.1 mm | 20.5 mm | 3.7 Nm | 62 |
NSK M281649D-610-610D ROLLING BEARINGS FOR STEEL MILLS | 5.5 kg | 150 mm | 26 mm | KM 30 |